• When used as a dimmer, brightness of neon tube can be reduced to less than 2% without any reduction of footage
• When used as a flasher, outputs 3 and 4 generate alternate signals (2-point flasher)
• Single turn, 1/4 Inch dia non-conductive shaft is provided for adjustment of the flashing speed
• Control range is from faster than 10 flashes per second to slower than one flash every 4 s
• When speed adjustment is set to fully clockwise position, flashing stops and both outputs stay lit
• Unit is mounted in 3/8 Inch dia hole using two 8-32 screws

Standard/Approvals: UL Recognized Components Directory and UL Sign Accessory Manual (SAM)

Application: For with the Gatable Series of Tech 22 Neon Power Supplies to Control Brightness and/or to Flash One or More Neon Units